Supported device ID and product strings:. VID067B&PID2303 for 'Prolific USB-to-Serial Comm Port' (PL2303 series). VID067B&PID2304 for 'Prolific USB-to-GPIO/PWM Port' (PL2303TB chip). Windows device driver information for USB to Serial Port. Computer devices that were manufactured a few years back are most probably fitted with serial ports as compared to recent manufactured computers that have been fitted with USB ports. Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the This page contains the VCP drivers currently available for FTDI devices. For D2XX Direct drivers, please click here.

Windows 7 64-bit & 32-bit, Windows Vista 64-bit & 32-bit, Windows XP, Windows 2000, Windows Me, Windows 98

Important note regarding Windows 7 and Vista:
The driver MUST be installed 'as Administrator'
Right-click the downloaded EXE file and choose Run as administrator

Serial Com Device Port Devices Driver Download 64-bit

Download the Windows installer for the USB RS-232 adaptor:
Download for Windows 7/Vista/XP (32-bit)
Download for Windows 7/Vista (32-bit and 64-bit)

If for some reason the above driver does not work, try one of the following:
Download for Windows 7/Vista/XP (32-bit and 64-bit - Alternate driver)
Download for Windows XP, 2000, 98/ME (32-bit only)

For older cables (purchased prior to October, 2010):
Download for Windows 7/Vista/XP (32-bit and 64-bit)
Download for Windows Vista (32-bit only)

Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.

NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)

Check the software driver installation

1) Open the Device Manager dialog from Control Panel

• Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
• Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager
  

2) Click the plus sign (+) next to 'Ports'.

3) If the device is properly installed, 'Serialio.com USB Serial Port' or 'Prolific USB-to-Serial COM Port' will be displayed.

Radio data driver download for windows 7.

The software driver is properly installed, but the USB-RS232 adaptor does not work as expected

One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 - COM4)

If the USB-RS232 adapter is installed as COM5, it may need to be reassigned to COM1 - COM4 to work with some software.

The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE

Windows XP

1) Follow steps 1-3 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) In the 'COM Port Number' drop-down select the desired port number. Rms usb devices driver download for windows 10. For example if the software requires COM2, select COM2. Note the COM port must have '(in use)' listed next to it, if it does then another device with that name is already installed in the system. After selecting the desire port number, click 'OK.'

5) Click 'OK' again, and the device will show up as being on the same COM port that it was before (i.e., COM5), but should show up on the selected port name when the Device Manager dialog is closed and opened again.

6) Close the Device Manager. Launch the software to use with the new COM port.

Windows 2000, Me, and 98 SE (Second Edition)

1) Follow steps 1 2 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties.

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

Serial Com Device Port Devices Driver Download Win 10

4) Uncheck 'Use automatic settings'.

5) Select 'Input/Output range'. Click on 'Change Settings'.

6) Type '02E8-02EF' in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.

• COM 1: 03F8-03FF
• COM 2: 02F8-02FF
• COM 3: 03E8-03EF
• COM 4: 02E8-02EF

7) Enter the value, then click OK. Click OK again, then click Yes when the 'Creating a Forced Configuration' window appears. Click OK.

Serial Com Device Port Devices Driver Download Windows 10

8) Restart the computer. The Device Manager can be checked, to see the COM port change.

Serial Com Device Port Devices Driver Download Windows 8

Note: Adaptor may not be exactly as pictured above.
back

Linux should support USB CDC, HID-POS and USB keyboard natively. Product doesn't support USB CDC: HR100, HR200, HR200C,HR15 corded, HR15 cordless, EM1300. Oracle Database 12.1.0.1 JDBC Driver & UCP Downloads Zipped JDBC Driver and Companion JARs. Classes for NLS support. Xdb6.jar (263,690 bytes) - (SHA1. Nls driver download windows 7. Download 3D-NLS PLUS Softwarev1.3.1 Korean Standard Edition. 3D-NLS PLUS Softwarev1.3.1 Japanese Standard Edition Download 3D-NLS. SOLO-FREQ-Personal-MEDIO driver. Plazmotronic driver. DIACOM SOLO-ECG driver. DIACOM-SOLO-FREQ-PC driver. DIACOM-SOLO-NLS driver DIACOM-SOLO-NLS-minica driver.